FineVu | GX400 Front Only 32Gb Hardwire with FinePower 250 Batter
- 32GB MicroSD Card Included. (Upgradeable upto 256GB).
- FineVu | GX400 Front 32Gb Hardwire with FinePower 250 Battery Pack.
- Built-in GPS.
- Resolution : Quad HD (2560x1440p)
- Lens angle : 122 (Diagonal)°
- Built-in Wi-Fi.
- Image Sensor : 5.1M pixels, SONY Exmor R STARVIS IMX335
- Speed Camera Alerts.
- Auto Night Vision.
- AI Heat Monitoring
- Power Saving Parking Mode.
- Time Lapse.
- ADAS Plus.
- Low Voltage Cut-off.
- Format Free 2.0 .
- Battery : Supercapacitor.
- Buil-in Mic & Speaker.
- Power Consumption :
-Parking Mode : 5.0W
- Power Saving Parking Mode : 0.06W.
- 3 Year Device Warranty.
- Absolute Parking Guard.
- Live Motion Detection.
- Loop Recording.
- High Dynamic Range.
- Smartphone App : FineVu Wi-Fi App.
- PC Viewer : FineVu Player 2.0.
- Discharge Prevention.
(Supplied, inc VAT)
What's in the box
- Dash Cam.
- FinePower 250 Battery Pack
- Hardwire Cable.
- Micro SD Card.
- User Guide.
GX400 Specifications
- Image Sensor : 5.1M Pixels SONY STARVIS IMX335.
- Resolution : 2k Quad HD (2560x1440p) / 30FPS
- Viewing angle : 122° (Diagonal)
- Auto Night Vision.
- Built-in Mic & Speaker..
- Capacity: 256GB.
- Sensor: 3-Axis Accelerometer G-Sensor (3D, ±3G).
- GPS: Built-in GPS.
- WI-FI: Built-in Wi-Fi.
- Power Consumption :
- Parking Mode : 5W
- Power Saving Parking Mode : 0.06W
FinePower 250 Battery Specifications
- Model : FinePower 250
- Battery Type : LiFePO₄ (Lithium Iron Phosphate) 9.6V / 8A
- Charging Time : Approx. 70 minutes
- Dimensions / Weight : 13.5 x 17.5 x 3.2 cm (5.31 x 6.89 x 1.26 in) / 965g
- Rated Output : 8.6V ~ 12.5V / 1A (Max 1.5A)
- Internal Protection : Fast charging protection, overcharge, over-discharge, overvoltage, and short-circuit protection
- Battery Safety Certification : XU103017 - 22001A
Caution
※ This product is compatible with vehicles that use a 12V electrical system.
It cannot be installed in large vehicles with a 24V system (e.g., dump trucks, buses, cargo trucks, etc.).
* If self-installation is difficult, please seek assistance from a professional installation service.
* Any issues or damage caused during self-installation are the responsibility of the user.
1. This product is intended for 12V vehicles and requires professional installation.
2. Do not install or operate the product in wet conditions to avoid electric shock or malfunction.
3. Install the product in a location where it will not be exposed to direct sunlight, which may cause failure or fire.
4. Disassembly, modification, or impact may lead to product damage or fire.
5. Do not use this product for any purposes other than its intended use.
6. Always use certified and compatible parts for installation.
7. Be sure to connect the fuse box wires to the correct IN/OUT terminals.
8. After connecting the dashcam power cable, connect it to the OUTPUT terminal of the auxiliary battery.






























