Autowatch Ghost II Tassa Approved Digital Canbus Immobilisr
Suitable for:
- Nationwide installation available.
- Tassa approved.
- Nationwide installation available.
- Digital canbus immobiliser.
- Various vehicle buttons can be used to execute arming and disarming of the ghost system as each vehicle varies.
- Bluetooth tags can be used as opposed to using buttons.
- Arming and disarming of the ghost can also be done via application.
- Passive arming function automatically arms the immobiliser as standard
- Built-in valet mode function can be used as a temporary bypass function when the vehicle enters a garage for any service work etc. Please note the valet function will disappear by entering the correct PIN number or driving the vehicle above 30mph.
- Emergency function is available via the card provided. This is used in case you have forgotten your PIN number.
- 12volt is suitable for cars, vans, and most European-manufactured motorhomes.
(fully fitted, inc VAT)
The Ghost-II adds another layer of convenience by allowing two smartphones and two key-fob tags to disarm the Ghost-II. The Ghost-II cannot be found using normal theft methods as it has no LED’s or buttons giving away its location. Moreover, due to the use of the latest micro-manufacturing techniques the Ghost-II is small enough to hide almost anywhere in the vehicle.
Advantages:
Engine start blocking
The Ghost-II will prevent the start of the engine unless the unique, user defined Disarm sequence has been entered first
Stops key cloning and ECU swapping
A thief cannot simply add a new key or replace an ECU to bypass the Ghost-II and start the vehicle. Only a correct Disarm sequence will allow the engine to start.
Undetectable using diagnostics
A modern thief can use diagnostics to detect circuit cuts on modern vehicles. The Ghost has no circuit cuts so it cannot be found using these methods
Tassa Approved
The Autowatch Ghost immobiliser holds TASSA accreditation, rendering it recognised by a multitude of insurers and often stipulated as a requirement.
Weatherproof tiny device
The Ghost-II is concealed and so small it can be installed and wrapped into the vehicle harness anywhere in the vehicle making it near impossible for a thief to find.
No radio frequency signals
Thieves cannot use sophisticated RF scanning, code grabbing technology to detect what security device your vehicle has when it does not transmit any signals with any other security systems.
Emergency Disarm sequence
If the disarm sequence is forgotten, the car is sold or a button is broken there is a secure, unique reset code for each device.
Advantages of using the CAN data network
The use of the CAN data bus has several advantages including low risk during installation, low probability of detection, and allows for placement almost anywhere in the vehicle.
Service / Valet mode
Service mode allows your vehicle to temporarily start and drive without requiring the Disarm sequence. The Ghost-II will exit service mode based on speed and time or by simply entering the Disarm sequence.
Silent operation
Because the unit communicates with the ECU on the data bus to immobilise the vehicle there is no way a thief could listen for the tell tale clicking of a traditional immobiliser relay.
Tested for each vehicle
Due to the nature of the data bus communication the Ghost-II has been adapted and tested for every vehicle we list as compatible. If we list your vehicle you can be sure we have thoroughly tested its operation with the Ghost-II.
Pin Configuration
Rest assured, a fail-safe solution is in place. An access card containing a reset code is provided. If you forget your sequence, you can use this unique reset code to establish a new, permanent PIN sequence.
Bluetooth Tags
The disarm PIN sequence offers a customisable range of 4 to 20 buttons within your vehicle cockpit. This sequence can encompass a combination of existing controls, ranging from windshield wiper toggles to electric window buttons. If you do not like entering buttons Bluetooth fobs are available.
Valet Function
Ghost - Service / valet mode
Service / valet mode allows you to hand over the keys to your car to someone without having to give them your disarm sequence. This way they get to know that your car is protected by the Ghost. Use this mode when you take your car for service or valet parking. Here are a few key points about service mode.
- Allows for an indefinite amount for starts and drives without needing the disarm sequence
- Turns off all key learning protection (this is still active when the Ghost is disarmed!)
- Can be manually turned exited
- Will exit automatically when driven for a reasonable time
- Disarm the system using your disarm sequence or mobile app
- Drive to, and park up at the dealership, airport, valeter’s etc and while the engine is still running, turn the app completely off then press your service button 5 times
- The indication lamp will flash back at you 5 times to confirm service / valet mode has been entered
- Simply enter your normal disarm sequence (must have an ignition cycle since service mode was entered)
- There will be the normal disarm 2 flash confirmation
- The next time the ignition is switched off the Ghost will rearm as normal
- Drive up to 31 mph (50 kph)
- Continue to drive (at any speed) for 15 minutes
- Once the time as elapsed there will be 2 flashes to indicate that service / valet mode has exited
Note 2: Should you not know what your service button is contact us or Autowatch Uk 01732 886777.