Products by Vehicle Type

Product Finder 5 columns

Runlock | Mercedes Vito

the VTT MERCEDES VITO RUNLOCK is a complete CAN based Runlock system for the Mercedes Vito 2014 Onwards. The interface enables the key to be removed whilst the ignition is still running and ensures maximum safety and security.

The interface incorporates a multi-function status LED, which indicates correct connection to the CAN system, CAN activity present and confirmation that the CAN identity has been recognised.

Compatibility List:
Mercedes Vito W447 (2014 Onwards)
This includes Runlock Switch.

 

£708.80

(Supplied & Fitted, inc VAT)

The Runlock System is activated by the use of a momentary switch, which is provided with the Runlock Sysem, and once pressed, the vehicle will allow the key to be turned to the 'off position' and removed with the engine staying on. The doors can then be locked and unlocked securely using the vehicles own remote.

We offer a range of intelligent, vehicle specific Runlock systems. These offer the convenience of locking control, using the original remote key where possible and advanced security against unauthorised vehicle movement. These systems include a range of monitoring features detected directly via the vehicle CAN system for maximum functionality and security with minimal installation effort.

 

Ask a Question
A stop-start or start-stop system is an automatic system that can restart and turn off a vehicle’s engine to reduce engine idling time. As a result, a significant reduction in emissions and fuel consumption occurs in busy areas.
No, it is not allowed to cut short the cruise control cable. In case the cruise control cable is longer than required, it can be looped but make sure the loop has a diameter that is larger than 6”. REMOVE PLEASE
You might need to maintain a specific speed for some time in some areas during travel and cruise control system can do it for you. It is designed to automatically maintain the speed of your vehicle. The driver can leave the accelerator and steering when cruise control is active. When activated, cruise control takes over the throttle of the vehicle. The driver will have to disable cruise control to take back the vehicle’s control.
The run lock device has an operating voltage of 12 Volt or 24 Volt.
A run lock is a device that allows you to keep the engine turned on when you remove the ignition key. This device does not work automatically; you must operate a switch to enable it. There are conditions that need to be met to use this device. For example, pull the handbrake and lock the vehicle door to activate run lock system. Some run locks are operated by switch or remote control. Besides, run locks can run automatically. These devices are necessary for refrigerated vehicles and vehicles that transport... Read more

Yes, you can install it into another vehicle. It is subject to programming as these devices use CAN bus technology.

Please check the specific product page to see the terms and conditions associated with a product.

We start processing your order immediately after your confirmation. We may need 3 or more for execute installation.

Please feel free to contact us if you want to raise a support request.

In case of malfunction, please contact us to make a service call.

The cost of installing a product into your vehicle varies greatly. Our products only include supply and fit facility.

Different specialist upgrade products have a different life expectancy.

Yes, most of our specialist upgrade products come with a warranty. Please check the product pages to know more. The warranty ranges from 1 to 3 years.

Do you have any questions?

PLEASE CALL US ON 01274733633 OR CONTACT US BELOW

Copyright © 2022 Audioimages LTD. All rights reserved.