Thinkware | Dash Cam U3000 Front & Rear (Both Hardwire and Plug & Play)
- 64GB MicroSD Card Included. (Upgradeable upto 256GB).
- Built-in GPS.
- U3000 64GB 1CH Both Hardwire and Plug & play.
- Built-in Radar for Front & Rear.
- Resolution:
-Front: 4K UHD @30fps.
-Rear: 2K QHD
- Speed Camera Alerts.
- Built-in Wi-Fi.
- Camera Resolution: 8.42 Megapixel, Sony Exmor R STARVIS.
- Viewing angle: Front 152° , Rear 128° .
- Camera: 8.42 Megapixel, Sony Exmor R STARVIS 2
- Thinkware Connected Service.
- Super Night Vision 4.0.
- Smart Parking Mode.
- New Advanced Driver Assisstance System.
- Optional Image Quality.
- Built-in Bluetooth.
- Thinkware U 3000 Recording Time PDF.
- Sensor: 3-Axis Accelerometer G-Sensor (3D, ±3G).
- Multiple Recording Modes.
- Wide Dynamic Range.
- Format Free Technology.
- High Temperature Protection System.
- Sensor: 3-Axis Accelerometer G-Sensor (3D, ±3G).
- Parking Surveillance Mode.
- Built-in Motion & Impact Detection.
- Time Lapse Parking Mode.
- Multiple Recording Modes.
- Energy Saving Mode (2.0).
- Easy Wi-Fi device pairing with Thinkware Link App & Bluetooth.
- Format Free Technology.
- Power Input Power: DC 12/24V.
- Please note when purchasing a 2/3 channel combination dashcam for automobiles. Certain vehicles have complex tailgate applications from split tailgates to complex grommet arrangements, before a purchase is executed please either call us on 01274 733633 or email on info@vehicletrackingtech.co.uk beforehand so we can ascertain the information to hand.
- Please before purchasing a 2channel/multichannel dashcam combination for vans. Certain vans that are carpeted cannot have the rear dashcams installed. If any further assistance is required, please call on 01274 733633 or email on info@vehicletrackingtech.co.uk
NOTE : Regarding the Supplied & Fitted Options
(Supplied, inc VAT)
Key Features
What's in the box
- Dash Cam.
- Rear Cam.
- 12V Hardwire Power Cable.
- 12V Plug & Play Power Cable.
- 64GB MicroSD Card (1CH & 2CH)
- USB MicroSD Card Reader.
- Windshield Mount.
- Spare 3M Mounting Tape.
- CPL Filter
- Adhesive Cable Clips.
- Quick Start Guide.
Specifications
- Camera: 8.42 Megapixel, Sony Exmor R STARVIS 2.
- Resolution
- Front : 4K UHD (3840 X 2160} @30fps or 2K QHD (2560 X 1440} 60fps
- Rear: 2K QHD
- Viewing Angle
- Front 152° Diagonal
- Rear 128° Diagonal
- Capacity: Micro SD Card 64GB / 128GB / 256GB.
- Sensor: 3-Axis Accelerometer G-Sensor (3D, ±3G).
- GPS: Built-in GPS.
- Built-in Bluetooth.
- WI-FI: Built-in Wi-Fi.
- Input Power : Power Input Power: DC 12/24V.
- Full Specifications Here.
4K UHD RESOLUTION
Equipped with the latest Sony Starvis2 IMX678 Image Sensors, you can record in crystal clear 4K 2160p UHD front and 2K 1440p QHD rear cam footage day or night at 30FPS. The 152° front and 128° rear wide-angle lens minimise blind spots to assure all events are recorded without fail.
Dynamic Recording at 60fps Select 2K QHD to choose from 30FPS or 60FPS A higher frame rate can deliver both smoother and sharper images
4K IMAGE QUALITY SETTINGS
The greater the amount of data on the image displayed through the screen, the better the image quality.
The U3000 provides a clearer image by adjusting the number of bits per second of recorded images stored
Standard Option – 24Mbps
High Option – 30Mbps
SUPER NIGHT VISION 4.0 WITH SONY STARVIS2
Sony STARVIS2 IMX678 will be applied to the Dashcam for the first ever Optimised night vision technology allows capturing images in low-light conditions both continuous & parking recording. Record the moment when maximising low light conditions by SHCG (Super High Control Gain)
PARKING SURVEILLANCE MODE
Parking Surveillance mode is automatically activated when you turn off the ignition. This captures footage when a motion or impact is detected so you have video evidence of mishaps like hit-and-runs while you’re away from your vehicle.
*Requires Hardwiring Cable or OBD II Power Cable and installation for Parking Surveillance mode
(professional installation recommended)
BUILT-IN THINKWARE RADAR
Front and Rear Detection with 2 Channel Models
Dual RADAR will be applied to the Dashcam for the first ever
Dual RADAR is built into the front and rear cameras and When a person or vehicle is detected in a low-power recording situation,
it immediately wakes up and starts recording motion.
Sensitivity can be set in 5 steps and can be detected from 1M minimum to 5M maximum
U3000 Dual RADAR Standby Times
MOTION DETECTION
Monitor and capture any motion around the vehicle for potential vandalism attempts.
IMPACT DETECTION
Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.
TIME LAPSE PARKING MODE
Catch any potential bumps, scrapes and other incidents by recording footage from your vehicle when you are not nearby. Timelapse mode records at 2 frame per second (FPS) to reduce the size of the video file. This allows the dash cam to record longer than other dash cams whilst in parking mode.
ENERGY SAVING MODE 2.0
In Energy Saving mode, the dash cam goes on standby when entering Parking Surveillance mode and wakes up to record events triggered by impacts only.
When in use, the U3000 will go to sleep and soon after an impact has been detected by built-in G-sensor, the U3000 will wake up within a second and start recording for the next 20 seconds.
This allows the dash cam to conserve energy and increase up to 5 times the total duration of the dash cam’s Parking Surveillance mode.
U3000 Energy Saving 2.0 Standby Times
* Based on 4,500mAH battery (BAB-50) * Variables: Temperature, the efficiency of the battery by usage time, and change in current after a detection.
Strong Impact Notifications while Driving
Impact Notifications when Parked
Send Emergency Message
Remote Live View
Vehicle Status & Driving History
Captured Image of Most Recent Parking
BUILT-IN GPS ANTENNA
SAFETY CAMERA ALERTS
Get audio warnings from your cash cam when approaching a wide variety of road safety cameras*. Thinkware Dash Cams provides active alert for these 5 types of road safety cameras while still recording videos. *UK speed camera (Cyclops) database with regular free updates
RED LIGHT WARNING SYSTEM
SPEED CAMERA WARNING SYSTEM
RED LIGHT & SPEED CAMERA WARNING SYSTEM
AVERAGE SPEED WARNING SYSTEM
MOBILE ZONE WARNING SYSTEM
ADVANCED DRIVER ASSISTANCE SYSTEM (ADAS)
NEW REAR COLLISION WARNING SYSTEM(RCWS)
The vehicle enters the rear for more than 50 km, it will automatically alert the user and record.
FORWARD COLLISION WARNING SYSTEM (FCWS/ UFCWS)
Warns the driver of impending road hazards.
FRONT VEHICLE DEPARTURE WARNING(FVDW)
Informs the driver of the vehicle ahead starting to move.
LANE DEPARTURE WARNING SYSTEM (LDWS)
Detects if the vehicle is veering off the driving lane.
GPS MAPPING
With GPS, all Thinkware dash cams can record the vehicle’s driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area. The PC/Mac viewer can then provide you with the vehicle speed and the time of a collision, and the severity of any impacts.
PC / MAC VIEWER
The intuitive and simple-to-use interface of Thinkware Dash Cam allows you an easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.
MULTIPLE RECORDING MODES
CONTINUOUS RECORDING MODE
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.
INCIDENT RECORDING MODE
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.
MANUAL RECORDING MODE
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.
FAIL-SAFE RECORDING
In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.
EASY WI-FI DEVICE PAIRING WITH THINKWARE LINK APP & BLUETOOTH
Built-in Bluetooth allows hassle-free dash cam pairing with your compatible Android or iOS device via the Thinkware Link App. Once paired, replay your latest driving videos and manage your dash cam’s settings with the Thinkware Link App. CHECK RECORDED IMAGES AND UPDATE FIRMWARE USING SMARTPHONES Your smartphone and the U3000 can be connected via the exclusive application ‘THINKWARE DASH CAM Mobile Viewer for U3000’ with built-in Wi-Fi in the navigation. Check, download or delete recorded images, update firmware or update safe driving information on the application.
FORMAT FREE 2.0 TECHNOLOGY
Avoid corrupt memory cards and the slow process of having to reformat your SD Cards with the free flowing recording system. One of the most common issues with a Dash cam’s reliability is the SD card, these cards are continuously overwritten and often become corrupt if not formatted often. This normally means that you have to remove the SD card and put it into a computer to reformat it. Thinkware have overcome this vulnerability by making the dashcam pre-allocate the memory, avoiding the need to format the SD card on a regular basis and making the footage easily viewable on our Thinkware viewer software.
SMART PARKING MODE
When a high temperature occurs, it switches to Low power mode, and when it enters a stable Temperature, it actively changes to the existing Recording mode. * Provide optimised energy saving with THINKWARE`s external battery
REAR CAMERA
Designed to be mounted inside the vehicle on the rear window facing out. A 128° wide-angle lens captures all footage from behind the vehicle in 2K QHD detail. A great enhancement to parking mode. Includes Radar functionality for the rear of your vehicle.
While dashcams draw a small amount of power, they are unlikely to significantly impact your vehicle's battery life. However, it's a good idea to use parking mode with caution.
Dashcams complement safe driving practices by providing evidence in the event of incidents. They are a valuable addition to your safety and security toolkit, enhancing your confidence on the road.
Regular maintenance includes keep formatting SD cards at regular intervals for optimum performance, lens clean, ensuring the power source is stable, and periodically updating the dashcam's firmware for performance improvements.
Dashcams are generally legal to use for personal use, but their use may be subject to data protection regulations. Our experts can provide guidance on legal and ethical usage.
Many dashcams feature a parking mode that monitors your vehicle even when it's parked. It can capture incidents such as accidents, break-ins, or vandalism, providing valuable evidence.
Yes, you can install multiple dashcams for full coverage. Some systems offer front and rear cameras, while others allow for additional side or interior cameras for a complete recording solution.
Dashcam footage is typically stored on an SD card or can be transferred to a computer or smartphone for viewing. It's advisable to back up important footage to a computer or cloud storage.
Do dashcams work at night or in low-light conditions, and do they require special features for this?
The dashcams we offer are equipped with night vision or low-light recording capabilities, ensuring clear video footage even in challenging lighting conditions.
Dashcams are not typically included as standard features in vehicles. They are separate accessories that you can add to your car to enjoy the benefits of video recording while driving.
You can't explain that! Just kidding. Dash cams record video to a removable memory card inside the camera itself. Any time your car is on and the dash cam is plugged in, it is acting as your backup witness. Dash cams automatically start recording when they are powered on, and stop recording once you turn your car off. Note: Some dash cam models have the ability to keep recording even while the vehicle is parked! This is known as "parking mode".
Once you have purchased a dash, in most cases this is all you need to do to be up and running:
- Insert a memory card.
- Attach the suction-cup mount to your windshield.
- Plug the power cord into the power source (cigarette lighter or other).
Done! Since recording is automatic, just drive your vehicle like you normally would, and enjoy the fact that you are now "protected by dashcam"!.
Please note that the above is applicable to plug & play dash cams.
Read moreDash cams, or dashboard video cameras, got their name due to originally being mounted on the dashboard of vehicles (mostly police cars). Now, most dash cams mount to a car's windshield with a secure and easy to use suction cup mount or strong adhesive pad.
While many of our dashcams can be easily self-installed, some vehicles, especially those with specific features like split tailgates or complex wiring, may require professional assistance. Our expert installers can handle these challenges, ensuring optimal placement and functionality of your dashcam.
: Absolutely! Our dashcams allow you to access and download recorded footage remotely through a user-friendly online platform or mobile app. For added convenience, some models also support SD card storage, providing an offline option to review your recordings.
If your dash cam is plug & play you can install it your self or you may call our experts to install it in your vehicle however if your dash cam is hardwired then it is adviseable to have our competent engineers install it in your vehicle.