SECURE CONNECTING MECHANISM

The dash cam perfectly clips into Thinkware Dash Cam Plugin. It uses a connecting mechanism embedded within the connector cradle for a secure and safe connection.

CLEAN CABLE INTEGRATION

The power cable and GPS module are connected on Thinkware Dash Cam Plugin. This reduces the risk of overheating as the power connector is separated from the main unit.

HIGH DEFINITION VIDEO QUALITY

CMOS Image Sensors allow crisp clean Full 1080p HD footage recording during both day and night at 30FPS. Capture more detail in all road conditions including number plates of other drivers.

The 135° wide angle lens view will minimize blind spots to assure recording of all events without fail.

Add a rear camera to capture 720p footage with a 140° wide-angle lens.

SUPER NIGHT VISION 3.0

Record night-time drives with true colours and minimal noise thanks to Thinkware’s latest advancements in low-light recording technology that surpasses its predecessors’ nighttime performance. The dash cam uses a combination of Digital Overlap High Dynamic Range (DOL HDR) and Noise Reduction technology to effectively reduce noise and lens flare effects that typically affect nighttime footage.

DEWARPING VIDEO TECHNOLOGY

Dewarping technology allows the dashcam’s front camera to deliver a close-to-real picture of the vehicle’s front view with minimal distortion.

HIGH-EFFICIENCY VIDEO CODING FORMAT

High-Efficiency Video Coding (HEVC) compresses high-resolution videos by streaming at low bit rates to minimize storage costs. HEVC has a compression rate of 1.7 times higher than the standard Advanced Video Coding format in dash cams. Hence, you get outstanding video quality with less consumption of memory space.

ENERGY SAVING MODE 2.0

The improved energy mode further reduces power consumption and provides even longer video recording than our original energy-saving and parking modes. When you are away from your car for an extended period of time, energy saving parking recording is a recommended solution.

When in use, the device will go to sleep and after an impact has been detected by the built-in G-sensor, it will wake up within a second and start recording for the next 20 seconds.

Motion Detection

Monitor and capture any motion around the vehicle for potential vandalism attempts.

Impact Detection

Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.

CONTINUOUS RECORDING MODE

This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

INCIDENT RECORDING MODE

The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

MANUAL RECORDING MODE

Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.

FAIL-SAFE RECORDING

In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.

HIGH DYNAMIC RANGE

Capture maximum image detail. The dash cam automatically corrects exposure levels with the multi-exposure feature, enabling the unit to get a clean image even when light levels are too high or low.

HIGH-TEMPERATURE PROTECTION SYSTEM

Protects your dashboard camera from overheating and causing potentially irreversible damage to it or its data. The specially designed heat discharge construction and the built-in thermal sensor of the dash cam protects the device and its data against intense heat by automatically turning it off to prevent overheating. All Thinkware cameras use a Super Capacitor, designed with Temperature Protection, for an emergency power source in the event of a crash or sudden power loss, allowing the unit to save the last 10 seconds of an incident.

FORMAT FREE TECHNOLOGY

Avoid corrupt memory cards and the slow process of having to reformat your SD Cards with the free flowing recording system.

One of the most common issues with a Dash cam’s reliability is the SD card, these cards are continuously overwritten and often become corrupt if not formatted often. This normally means that you have to remove the SD card and put it into a computer to reformat it. Thinkware have overcome this vulnerability by making the dashcam pre-allocate the memory, avoiding the need to format the SD card on a regular basis and making the footage easily viewable on our Thinkware viewer software.

TIME LAPSE PARKING MODE

Catch any potential bumps, scrapes and other incidents by recording footage from your vehicle when you are not nearby. Timelapse mode records at 2 frame per second (FPS) to reduce the size of the video file. This allows the dash cam to record longer than other dash cams whilst in parking mode.